Dscaff SAS support to segmental box girder with all access platform for safer action and access while launching , placing of segmental box girder. KVMRT V207. Supporting up to 80 kN.
Our Group Managing Directors Interview in The Edge News Paper
Sunderaj Nagalingam, group managing director of Dscaff Group, says local SMEs should take a longer-term view when it comes to product certification, depending on which sectors they operate in. While it could be challenging, getting their products certified overseas will not only enable them to enter foreign markets but also help them boost their business on the local front.
Take Dscaff, which exports its scaffolding products to several Southeast Asian countries and Australia. It recently made a breakthrough back home when it secured a purchase order from national oil company Petroliam Nasional Bhd (Petronas).
The key reasons for this, says Sunderaj, are that Dscaff is certified in developed markets and has managed to build a reputation overseas. “This is a very good example of how SMEs can benefit from getting their products certified locally and overseas,” he points out.
Read more – http://www.theedgemarkets.com/
“Reproduced by permission of The Edge Communications Sdn. Bhd., Copyright © 2018 The Edge Communications Sdn. Bhd. All Rights Reserved Worldwide.”
DXS Temporary Sidewall Access Platform installation for MRT Pasar Seni conducted on 27th November to 30th November,2017. This project took 4 days to erect and the works were only carried out at night from 10.00p.m to 5.00 a.m.
Scope of Project
Two unit of 35.2m DXS access platforms each weighing 2.6 tonne were installed on both sides of MRT pedestrian bridge with one mobile tower on each platform. Each platform has a safe working load of 500kg.
The location of this project is at MRT Pasar Seni near Jalan Tun Sambanthan.The existing bridge is located 12m above the river.
Challenges at Site
There are few notable challenges such as night work, road closure, abrupt changes in river level and limited road access.
Unloading material requires 25 ton mobile crane to unload from road to riverberm at 6m height which consumes 2 hours for the unloading process.
Lifting temporary access platform on temporary support requires minimum 160 ton of mobile crane as the working radius from the center of mobile crane location to centre of existing pedestrian bridge is about 40m. Lifting process for 2nd platform was quite challenging, as we needed to due to avoid the existing roofing structure at LRT Pasar Seni and walkway.
Special Staircase for Bachy – Solentanche.
Project : Tun Razak Exchange, MALAYSIA.
SAS Modular Access Stairs with Ladder Beam. 7 meters in length with a safe working capacity of 750kg.
The term Modular building refers to a structure which comprise of individual sections called “modules”.
DXS Modular Warehouse system is a completely prefabricated system, where all components are manufactured in a controlled factory environment ensuring consistent quality and eliminates on site fabrication. The structure is extendable, easily relocatable and quick to install.
DXS trusses are lightweight and high strength modular space frames. A complete warehouse structure consists of main frames, starter frames, spigots and apex frames. The main frame are the backbones of the roof truss system which are connected together using spigot and bolts to form a large span truss.
Conventional system vs DXS system
Conventional warehouse system requires more time and the risk of work at heights while Dscaff DXS Warehouse system truss modules can be assembled on the ground level, complete with roof purlins. This reduces the risk of working at height and eventually reduces the duration of assembling.
Advantage of Using Dscaff Dxs Modular Warehouse:
- Minimal site preparation as only lightweight slab and no piling is required on average soil condition.
- The structure is extendable, easily relocatable and quick to install.
- A choice of width, height and length to optimise your usage.
- DXS Sytem can be used to build temporary and permanent buildings. The structure can then be customised to the clients requirement.
At DXS we strive for efficiency right from design stage. We continuously strive for improvement in our processes so that we can deliver real value to our customer.
Applications for DXS Multipurpose Modular Structures
- Industrialized Building System
- Industrialized Weather Protection
- Large Span Structure
- Emergency Shelter
- Storage Solutions
- Modular Buildings
- Prefabricated Buildings
- Relocatable Structures / Buildings
- Temporary Office
- Temporary Storage
- Temporary Shed
- Temporary Warehousing
- Ship in Stand Container
This light-weight alloy truss system has exceptional strength and allows you to build a variety of long spanned structures . The possibilities reach as far as the imagination and facilitate both straight and curved applications.
Come and join us at #OneBuild 2017 Kuala Lumpur, Convention Center from 2nd – 4th November 2017 @Booth : K01
Eco-friendly grandstand for the community, by the community. When it comes to designing grandstands, ModulArena is always looking for solutions that will benefit the local community development and at the same time be eco-friendly. That the main reason ModulArena has opted for an innovative mixed structure design with precast reinforced concrete deck seating on a modular steel supporting structure. ModulArena grandstands are designed so that it optimizes the total quantity of material required. It is the best way to built eco-friendly grandstands that minimize the impact on the environment.
Local fabrication It is also designed so that all Reinforced Concrete items can be precast anywhere near the stadium construction site. In the process, 80% of the total weight of the entire grandstand can be locally fabricated, using locally produced raw materials (Concrete and Steel). (All materials used to fabricate ModulArena grandstands are recyclable).
Transportation reduced by 80% Any materials that can be locally sourced do not require as much transportation to the site. Locally produced materials thus reduce the carbon footprint of the project. ModulArena’s target is to ship from its factory only what can’t be easily fabricated locally. The total volume and weight of equipment to be shipped from our factory to the construction site is therefore reduced by 80%.
Local Community involvment
ModulArena’s objective is to have the local community be part of the project during the construction phase. A grandstand construction project shall contribute to the local community development. ModulArena always emphasizes on local workforce participation in the grandstands construction process. And our objective is to provide job for the local community rather than outside contractors. It starts from the fabrication of the Reinforced concrete items.
Our simplified fabrication process gives the opportunity to the local workforce to actively participate in the project. Later on, for the final assembly of the grandstand, local workforce is also required. ModulArena Grandstands are designed so that the assembly doesn’t require highly skilled workers. It gives job opportunity for people who are willing to learn new skills in the construction field. It means that during the grandstand construction people can acquire new skills. These skills will later benefit the entire community on some other projects.
“Community is something we do together”
Dato’ Sri Norza Zakaria, President Badminton Association Malaysia (BAM), visited Dscaff office on discussions regarding DXS Modular Multipurpose Badminton Hall. Attending together is our Chairman Datuk Aminuddin Mustapha.
]Dscaff SAS Modular Scaffolding Training was done for MESEI, SCC(steam cracker complex) Toyo Engineering Package @ RAPID, Pengerang, Johor
Dscaff SAS Modular Scaffolding System (heavy duty rating) with double bay cantilever including all the SAS Accessories holding 12 Dscaff staffs without any deflection.
Come and visit our showroom @Dscaff HQ – Mont Kiara, Kuala Lumpur to check out all of our latest innovations.
More on SAS Modular Scaffolding- Click here